智能制造装备与数控加工实验室
您当前的位置: 首页 > 科研成果 > 发表文章 > 正文

发表文章

A Simplified Method to Identify the Equivalent Joint Parameters of Holder-Tool Interface

The clamping length of holder-tool often changes with the machining conditions and is the main factor affecting the stiffness and damping values of holder-tool interface. To avoid the need for repeating the measurements, the previous studies identify the joint stiffness-damping parameters based on genetic algorithm and calculate the joint parameters per unit area of holder-tool interface for response prediction. This paper proposes a simplified method to identify the joint parameters by simplifying the continuous contact interface to contact points in side of the clamping part. The equivalent joint stiffness-damping parameters are calculated by an inverse calculation method along the whole frequency band, which is more efficient than the genetic algorithm. The responses of holder-tool assembly with different clamping length are predicted based on the assumption of linear relationship between the stiffness-damping values and clamping length. At last, the experiment cases were carried out to verify the effective of the simplified method.

如果您对我们有任何的意见或建议,请及时联系我们,我们会尽快给您回复。

地址:
湖北武汉珞瑜路1037号华中科技 大学先进制造大楼东楼
邮编:
430074
电话:
+86-27-87543747
邮箱:
pengfy@hust.edu.cn